diff options
| author | MDC Service <michael.schmid@mdc-service.de> | 2022-05-25 13:07:19 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2022-05-25 13:07:19 +0200 |
| commit | ddd05b2c7e4b5c9f95f913b5ca24be9edc5bd7bb (patch) | |
| tree | 47bd8efdb41386734333bdc6f199901784f1915f /software/michi_funcs/board_rev_B.hpp | |
| parent | 124d22828708d4d3d843addeeb62d049c1c05fc2 (diff) | |
replace files with copyright header and Doxygen comments
Diffstat (limited to 'software/michi_funcs/board_rev_B.hpp')
| -rw-r--r-- | software/michi_funcs/board_rev_B.hpp | 63 |
1 files changed, 0 insertions, 63 deletions
diff --git a/software/michi_funcs/board_rev_B.hpp b/software/michi_funcs/board_rev_B.hpp deleted file mode 100644 index 74d4404..0000000 --- a/software/michi_funcs/board_rev_B.hpp +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _BOARD_REV_B_H_ -#define _BOARD_REV_B_H_ - -//board definitions for Rev B board (LAN8720 on board) -#include "schrank_ant_pcb.h" //contains setting of board revision - - -#define UHF_RXD_MISO 36 // pin 4 UART -#define LCD_RXD_MISO 39 // pin 5 UART - -#define SCL 32 //new Michi 01.05.2022 -#define SDA 33 //new Michi 01.05.2022 - - -#define I2C_MASTER_SCL_IO SCL -#define I2C_MASTER_SDA_IO SDA -#define I2C_MASTER_NUM 0 /*!< I2C master i2c port number, the number of i2c peripheral interfaces available will depend on the chip */ -#define I2C_MASTER_FREQ_HZ 100000 /*!< I2C master clock frequency */ -#define I2C_MASTER_TX_BUF_DISABLE 0 /*!< I2C master doesn't need buffer */ -#define I2C_MASTER_RX_BUF_DISABLE 0 /*!< I2C master doesn't need buffer */ -#define I2C_MASTER_TIMEOUT_MS 1000 -#define I2C_PORTEXP 0x22 -#define I2Cint 35 -#define EMAC_RXD0_RMII 25 // pin 10 ETH -#define EMAC_RXD1_RMII 26 // pin 11 ETH -#define EMAC_RX_CRS_DV 27 -#define HS2_CLK 14 -//#define PHY_PWR is in Rev B handled by I2C port expander, no longer a GPIO -//#define I2C_SDA_40p 13 // the I2C to the RasPi 40 port header is switched with the second port expander -#define HS2_CMD 15 -#define HS2_DATA0 02 -#define ETH_CLKREF 0 -#define UHF_TXD_MOSI 04 -#define LCD_TXD_MOSI 5 -//#define EMAC_CLK_OUT_180 17 // there is no GPIO17 on the WROVER module -#define SPI_CS 13// was: 05 -#define MDIO_RMII 18 -#define EMAC_TXD0_RMII 19 -#define EMAC_TX_EN_RMII 21 -#define RDR_RXD_MISO 03 -#define RDR_TXD_MOSI 01 -#define EMAC_TXD1_RMII 22 -#define MDC_RMII 23 -//#define I2C_PORTEXP 0x22 - -#define I2C_MASTER_NUM 0 /*!< I2C master i2c port number, the number of i2c peripheral interfaces available will depend on the chip */ - -// AW9523 I2C adress P40 1011000 = 88, 0x58 -// AW9523 I2C adress 10110 AD1 AD0 RW -//#define AW9523B_I2C_ADDRESS_MAIN 88 //0x58 -#define AW9523B_I2C_ADDRESS_MAIN 0x58 - -// AW9523 I2C adress P40 10110100 = 90, 0x5A -#define AW9523B_I2C_ADDRESS_ETH 0x5A //90dec -#define I2C_PORTEXP1 0x58 -#define I2C_PORTEXP2 0x5A - -void io_init(void); -esp_err_t i2c_init(void); -void kolban_i2cscanner(void ); - -#endif - |