replace files with copyright header and Doxygen comments

1 files changed, 0 insertions, 183 deletions

diff --git a/software/main/Kconfig.projbuild b/software/main/Kconfig.projbuild
deleted file mode 100644
index be15538..0000000
--- a/software/main/Kconfig.projbuild
+++ /dev/null
@@ -1,183 +0,0 @@
-menu "Example Configuration"
-
-    config EXAMPLE_USE_SPI_ETHERNET
-        bool
-
-    choice EXAMPLE_ETHERNET_TYPE
-        prompt "Ethernet Type"
-        default EXAMPLE_USE_INTERNAL_ETHERNET if IDF_TARGET_ESP32
-        default EXAMPLE_USE_W5500
-        help
-            Select which kind of Ethernet will be used in the example.
-
-        config EXAMPLE_USE_INTERNAL_ETHERNET
-            depends on IDF_TARGET_ESP32
-            select ETH_USE_ESP32_EMAC
-            bool "Internal EMAC"
-            help
-                Select internal Ethernet MAC controller.
-
-        config EXAMPLE_USE_DM9051
-            bool "DM9051 Module"
-            select EXAMPLE_USE_SPI_ETHERNET
-            select ETH_USE_SPI_ETHERNET
-            select ETH_SPI_ETHERNET_DM9051
-            help
-                Select external SPI-Ethernet module (DM9051).
-
-        config EXAMPLE_USE_W5500
-            bool "W5500 Module"
-            select EXAMPLE_USE_SPI_ETHERNET
-            select ETH_USE_SPI_ETHERNET
-            select ETH_SPI_ETHERNET_W5500
-            help
-                Select external SPI-Ethernet module (W5500).
-
-        config EXAMPLE_USE_KSZ8851SNL
-            bool "KSZ8851SNL Module"
-            select EXAMPLE_USE_SPI_ETHERNET
-            select ETH_USE_SPI_ETHERNET
-            select ETH_SPI_ETHERNET_KSZ8851SNL
-            help
-                Select external SPI-Ethernet module (KSZ8851SNL).
-    endchoice # EXAMPLE_ETHERNET_TYPE
-
-    if EXAMPLE_USE_INTERNAL_ETHERNET
-        choice EXAMPLE_ETH_PHY_MODEL
-            prompt "Ethernet PHY Device"
-            default EXAMPLE_ETH_PHY_IP101
-            help
-                Select the Ethernet PHY device to use in the example.
-
-            config EXAMPLE_ETH_PHY_IP101
-                bool "IP101"
-                help
-                    IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
-                    Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
-
-            config EXAMPLE_ETH_PHY_RTL8201
-                bool "RTL8201/SR8201"
-                help
-                    RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
-                    Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
-
-            config EXAMPLE_ETH_PHY_LAN8720
-                bool "LAN8720"
-                help
-                    LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
-                    Goto https://www.microchip.com/LAN8720A for more information about it.
-
-            config EXAMPLE_ETH_PHY_DP83848
-                bool "DP83848"
-                help
-                    DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
-                    Goto http://www.ti.com/product/DP83848J for more information about it.
-
-            config EXAMPLE_ETH_PHY_KSZ8041
-                bool "KSZ8041"
-                help
-                    The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8041 for more information about it.
-
-            config EXAMPLE_ETH_PHY_KSZ8081
-                bool "KSZ8081"
-                help
-                    The KSZ8081 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver.
-                    Goto https://www.microchip.com/wwwproducts/en/KSZ8081 for more information about it.
-        endchoice # EXAMPLE_ETH_PHY_MODEL
-
-        config EXAMPLE_ETH_MDC_GPIO
-            int "SMI MDC GPIO number"
-            default 23
-            help
-                Set the GPIO number used by SMI MDC.
-
-        config EXAMPLE_ETH_MDIO_GPIO
-            int "SMI MDIO GPIO number"
-            default 18
-            help
-                Set the GPIO number used by SMI MDIO.
-    endif # EXAMPLE_USE_INTERNAL_ETHERNET
-
-    if EXAMPLE_USE_SPI_ETHERNET
-        config EXAMPLE_ETH_SPI_HOST
-            int "SPI Host Number"
-            range 0 2
-            default 1
-            help
-                Set the SPI host used to communicate with the SPI Ethernet Controller.
-
-        config EXAMPLE_ETH_SPI_SCLK_GPIO
-            int "SPI SCLK GPIO number"
-            range 0 34 if IDF_TARGET_ESP32
-            range 0 46 if IDF_TARGET_ESP32S2
-            range 0 19 if IDF_TARGET_ESP32C3
-            default 18 if IDF_TARGET_ESP32
-            default 20 if IDF_TARGET_ESP32S2
-            default 6 if IDF_TARGET_ESP32C3
-            help
-                Set the GPIO number used by SPI SCLK.
-
-        config EXAMPLE_ETH_SPI_MOSI_GPIO
-            int "SPI MOSI GPIO number"
-            range 0 34 if IDF_TARGET_ESP32
-            range 0 46 if IDF_TARGET_ESP32S2
-            range 0 19 if IDF_TARGET_ESP32C3
-            default 23 if IDF_TARGET_ESP32
-            default 19 if IDF_TARGET_ESP32S2
-            default 7 if IDF_TARGET_ESP32C3
-            help
-                Set the GPIO number used by SPI MOSI.
-
-        config EXAMPLE_ETH_SPI_MISO_GPIO
-            int "SPI MISO GPIO number"
-            range 0 34 if IDF_TARGET_ESP32
-            range 0 46 if IDF_TARGET_ESP32S2
-            range 0 19 if IDF_TARGET_ESP32C3
-            default 19 if IDF_TARGET_ESP32
-            default 18 if IDF_TARGET_ESP32S2
-            default 2 if IDF_TARGET_ESP32C3
-            help
-                Set the GPIO number used by SPI MISO.
-
-        config EXAMPLE_ETH_SPI_CS_GPIO
-            int "SPI CS GPIO number"
-            range 0 34 if IDF_TARGET_ESP32
-            range 0 46 if IDF_TARGET_ESP32S2
-            range 0 19 if IDF_TARGET_ESP32C3
-            default 16 if IDF_TARGET_ESP32
-            default 21 if IDF_TARGET_ESP32S2
-            default 10 if IDF_TARGET_ESP32C3
-            help
-                Set the GPIO number used by SPI CS.
-
-        config EXAMPLE_ETH_SPI_CLOCK_MHZ
-            int "SPI clock speed (MHz)"
-            range 5 80
-            default 12 if IDF_TARGET_ESP32 || IDF_TARGET_ESP32C3
-            default 36 if IDF_TARGET_ESP32S2
-            help
-                Set the clock speed (MHz) of SPI interface.
-
-        config EXAMPLE_ETH_SPI_INT_GPIO
-            int "Interrupt GPIO number"
-            default 17 if IDF_TARGET_ESP32
-            default 4 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3
-            help
-                Set the GPIO number used by the SPI Ethernet module interrupt line.
-    endif # EXAMPLE_USE_SPI_ETHERNET
-
-    config EXAMPLE_ETH_PHY_RST_GPIO
-        int "PHY Reset GPIO number"
-        default 5
-        help
-            Set the GPIO number used to reset PHY chip.
-            Set to -1 to disable PHY chip hardware reset.
-
-    config EXAMPLE_ETH_PHY_ADDR
-        int "PHY Address"
-        range 0 31
-        default 1
-        help
-            Set PHY address according your board schematic.
-endmenu