diff options
| author | Adam Kelly <adam.kelly@phasezero.com.au> | 2020-01-15 00:00:55 +1100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2020-01-15 00:00:55 +1100 |
| commit | c7f688e91eded9943a83ed4e2b94b7d915227169 (patch) | |
| tree | 2f00997c5c565b18c5f95e2abe6fd3688e9eddfa | |
| parent | 32c83f1ecd129d46fc0fb65ce1febb8dc957a554 (diff) | |
Update README.md
fixed typo in fan cable link
| -rw-r--r-- | README.md | 2 |
1 files changed, 1 insertions, 1 deletions
@@ -38,7 +38,7 @@ The image above shows the rendered view of the device from Fusion 360 with an iP The BOM for the air purifier is: - 1x 120mm computer fan. I recommend you use this one: https://www.pccasegear.com/products/36033 which draws around 600ma, or if you have a larger power bank this one: https://www.pccasegear.com/products/27866 which draws around 1000ma but pushes a lot more air. The second fan is also a bit more expensive so if the budget is tight the first one will work perfectly. - 1x 2.5mm DC bulkhead socket: https://www.jaycar.com.au/2-5mm-bulkhead-male-dc-power-connector/p/PS0524. This allows you to plug the device in with the USB booster cable to supply 12vDC to the fan. - - 1x 12v USB booster cable: https://www.jaycar.com.au/universal-usb-12v-step-up-power-cable/p/PP1978./ Ensure you get the 12v version as these do come in 9v also and that wont work. + - 1x 12v USB booster cable: https://www.jaycar.com.au/universal-usb-12v-step-up-power-cable/p/PP1978 Ensure you get the 12v version as these do come in 9v also and that wont work. - 1x HEPA H13 filter: https://www.bunnings.com.au/powerfit-h13-hepa-cartridge-filter_p6210793. Ensure you get this exact filter as the housing is dimensioned to fit over the end. Other filters with the same diameter may work, but are untested. This filter comes with an end-piece that will be the base of your device, so ensure this is in the box. - 1x USB power bank. Any power bank that can supply 5v >1amp will work but for best results choose one at least 10,000maH that supports pass-through charging. This allows you to use the battery as a UPS for the air purifier and run it continuously from a mains power, with the battery being used for power outages. - 1x 3D printed fan housing. The STL file can be found in: [fan_housing](https://github.com/Kels316/DIY-Air-Purifier/blob/master/3D_print_files/fan_housing.stl) |