7 files changed, 0 insertions, 152 deletions
diff --git a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.cpp b/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.cpp
deleted file mode 100644
index c8f34b6..0000000
--- a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.cpp
+++ /dev/null
@@ -1,66 +0,0 @@
-#include <Arduino.h>
-/* Blink without Delay
- 
- Turns on and off a light emitting diode(LED) connected to a digital  
- pin, without using the delay() function.  This means that other code
- can run at the same time without being interrupted by the LED code.
- 
- The circuit:
- * LED attached from pin 13 to ground.
- * Note: on most Arduinos, there is already an LED on the board
- that's attached to pin 13, so no hardware is needed for this example.
- 
- 
- created 2005
- by David A. Mellis
- modified 8 Feb 2010
- by Paul Stoffregen
- 
- This example code is in the public domain.
-
- 
- http://www.arduino.cc/en/Tutorial/BlinkWithoutDelay
- */
-
-// constants won't change. Used here to 
-// set pin numbers:
-const int ledPin =  13;      // the number of the LED pin
-
-// Variables will change:
-int ledState = LOW;             // ledState used to set the LED
-long previousMillis = 0;        // will store last time LED was updated
-
-// the follow variables is a long because the time, measured in miliseconds,
-// will quickly become a bigger number than can be stored in an int.
-long interval = 1000;           // interval at which to blink (milliseconds)
-
-void setup() {
-  // set the digital pin as output:
-  pinMode(ledPin, OUTPUT);      
-}
-
-void loop()
-{
-  // here is where you'd put code that needs to be running all the time.
-
-  // check to see if it's time to blink the LED; that is, if the 
-  // difference between the current time and last time you blinked 
-  // the LED is bigger than the interval at which you want to 
-  // blink the LED.
-  unsigned long currentMillis = millis();
- 
-  if(currentMillis - previousMillis > interval) {
-    // save the last time you blinked the LED 
-    previousMillis = currentMillis;   
-
-    // if the LED is off turn it on and vice-versa:
-    if (ledState == LOW)
-      ledState = HIGH;
-    else
-      ledState = LOW;
-
-    // set the LED with the ledState of the variable:
-    digitalWrite(ledPin, ledState);
-  }
-}
-
diff --git a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.d b/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.d
deleted file mode 100644
index b0056e7..0000000
--- a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.d
+++ /dev/null
@@ -1,11 +0,0 @@
-build-cli/BlinkWithoutDelay.o: build-cli/BlinkWithoutDelay.cpp \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Arduino.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/binary.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/WCharacter.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/WString.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/HardwareSerial.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Stream.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Print.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Printable.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/new.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/variants/standard/pins_arduino.h
diff --git a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.elf b/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.elf
deleted file mode 100755
index 0a28fac..0000000
--- a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.elf
+++ /dev/null
diff --git a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.hex b/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.hex
deleted file mode 100644
index 80ecfc7..0000000
--- a/examples/BlinkWithoutDelay/build-cli/BlinkWithoutDelay.hex
+++ /dev/null
@@ -1,64 +0,0 @@
-:100000000C9461000C947E000C947E000C947E0095
-:100010000C947E000C947E000C947E000C947E0068
-:100020000C947E000C947E000C947E000C947E0058
-:100030000C947E000C947E000C947E000C947E0048
-:100040000C94CE000C947E000C947E000C947E00E8
-:100050000C947E000C947E000C947E000C947E0028
-:100060000C947E000C947E00000000002400270009
-:100070002A0000000000250028002B0000000000DE
-:1000800023002600290004040404040404040202DA
-:100090000202020203030303030301020408102007
-:1000A0004080010204081020010204081020000012
-:1000B0000007000201000003040600000000000029
-:1000C000000011241FBECFEFD8E0DEBFCDBF11E08E
-:1000D000A0E0B1E0E4EDF3E002C005900D92A430A1
-:1000E000B107D9F711E0A4E0B1E001C01D92A3313E
-:1000F000B107E1F70E94D9010C9480000C94000034
-:10010000F8940C94E801EF92FF920F931F930E94D2
-:1001100016017B018C018091060190910701A0914D
-:100120000801B0910901A8019701281B390B4A0B5E
-:100130005B0B8091000190910101A0910201B091AF
-:10014000030182179307A407B507F0F4E0920601B4
-:10015000F0920701009308011093090180910401B6
-:1001600090910501892B39F481E090E0909305018D
-:100170008093040104C010920501109204018DE0E7
-:10018000609104010E9485011F910F91FF90EF90F3
-:1001900008958DE061E00E945F0108951F920F9223
-:1001A0000FB60F9211242F933F938F939F93AF938A
-:1001B000BF9380910E0190910F01A0911001B09119
-:1001C0001101309112010196A11DB11D232F2D5F48
-:1001D0002D3720F02D570196A11DB11D209312013E
-:1001E00080930E0190930F01A0931001B093110121
-:1001F00080910A0190910B01A0910C01B0910D0129
-:100200000196A11DB11D80930A0190930B01A0934B
-:100210000C01B0930D01BF91AF919F918F913F91D0
-:100220002F910F900FBE0F901F9018958FB7F894D5
-:1002300020910E0130910F01409110015091110158
-:100240008FBFB901CA010895789484B5826084BDD6
-:1002500084B5816084BD85B5826085BD85B58160CA
-:1002600085BDEEE6F0E0808181608083E1E8F0E02A
-:100270001082808182608083808181608083E0E859
-:10028000F0E0808181608083E1EBF0E08081846038
-:100290008083E0EBF0E0808181608083EAE7F0E03A
-:1002A000808184608083808182608083808181609E
-:1002B00080838081806880831092C1000895482FD8
-:1002C00050E0CA0186569F4FFC0124914A575F4F68
-:1002D000FA0184918823C1F0E82FF0E0EE0FFF1FB0
-:1002E000E859FF4FA591B491662341F49FB7F89464
-:1002F0008C91209582238C939FBF08959FB7F8948B
-:100300008C91822B8C939FBF0895482F50E0CA0197
-:1003100082559F4FFC012491CA0186569F4FFC01D4
-:1003200094914A575F4FFA013491332309F440C046
-:10033000222351F1233071F0243028F42130A1F030
-:10034000223011F514C02630B1F02730C1F024302E
-:10035000D9F404C0809180008F7703C08091800021
-:100360008F7D8093800010C084B58F7702C084B5E4
-:100370008F7D84BD09C08091B0008F7703C08091CC
-:10038000B0008F7D8093B000E32FF0E0EE0FFF1FF1
-:10039000EE58FF4FA591B4912FB7F894662321F43E
-:1003A0008C919095892302C08C91892B8C932FBFBF
-:1003B0000895CF93DF930E9424010E94C900C0E0FA
-:1003C000D0E00E9483002097E1F30E940000F9CF63
-:0403D000F894FFCFCF
-:0403D400E80300003A
-:00000001FF
diff --git a/examples/BlinkWithoutDelay/build-cli/a.out.elf b/examples/BlinkWithoutDelay/build-cli/a.out.elf
deleted file mode 100755
index 0a28fac..0000000
--- a/examples/BlinkWithoutDelay/build-cli/a.out.elf
+++ /dev/null
diff --git a/examples/BlinkWithoutDelay/build-cli/depends.mk b/examples/BlinkWithoutDelay/build-cli/depends.mk
deleted file mode 100644
index b0056e7..0000000
--- a/examples/BlinkWithoutDelay/build-cli/depends.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-build-cli/BlinkWithoutDelay.o: build-cli/BlinkWithoutDelay.cpp \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Arduino.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/binary.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/WCharacter.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/WString.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/HardwareSerial.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Stream.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Print.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/Printable.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/cores/arduino/new.h \
-  /Applications/Arduino.app/Contents/Resources/Java/hardware/arduino/variants/standard/pins_arduino.h
diff --git a/examples/BlinkWithoutDelay/build-cli/libcore.a b/examples/BlinkWithoutDelay/build-cli/libcore.a
deleted file mode 100644
index 7decf6b..0000000
--- a/examples/BlinkWithoutDelay/build-cli/libcore.a
+++ /dev/null