1 files changed, 46 insertions, 0 deletions
diff --git a/examples/BlinkNetworkRPi/Makefile b/examples/BlinkNetworkRPi/Makefile
new file mode 100644
index 0000000..15e565e
--- /dev/null
+++ b/examples/BlinkNetworkRPi/Makefile
@@ -0,0 +1,46 @@
+# Arduino Make file. Refer to https://github.com/sudar/Arduino-Makefile
+
+# Tested and working with a linuxspi programmer on a remote Raspberry Pi
+# Refer to https://github.com/kcuzner/avrdude for linuxspi.
+# Should work with ISP as well if you replace $(AVRDUDE_ARD_OPTS) with
+# $(AVRDUDE_ISP_OPTS) in the net_set_fuses rule.
+
+# Alternate core from https://code.google.com/p/arduino-tiny
+ALTERNATE_CORE = tiny
+BOARD_TAG = attiny85at8
+
+# Avrdude config path on the remote Raspberry Pi
+AVRDUDE_CONF=/usr/local/etc/avrdude.conf
+
+# Skip the monitor port existance check since it's not on our machine.
+FORCE_MONITOR_PORT=true
+MONITOR_PORT=/dev/spidev0.0
+
+include ../../Arduino.mk
+
+
+# Additional rules to use a remote Raspberry Pi programmer
+
+# Note that it's recommended not to use root for this task,
+# but to setup spidev access on a normal user instead.
+HOST = root@alarmpi
+SSH_AVRDUDE = ssh $(HOST) /usr/local/bin/avrdude
+
+CAT_HEX = cat $(TARGET_HEX)
+AVRDUDE_UPLOAD_PIPE = -U flash:w:-:i
+
+.PHONY: net_upload net_set_fuses
+
+net_upload: $(TARGET_HEX) verify_size
+	$(CAT_HEX) | $(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
+		$(AVRDUDE_UPLOAD_PIPE)
+
+net_set_fuses:
+ifneq ($(strip $(AVRDUDE_ISP_FUSES_PRE)),)
+		$(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) -e \
+		$(AVRDUDE_ISP_FUSES_PRE)
+endif
+ifneq ($(strip $(AVRDUDE_ISP_FUSES_POST)),)
+		$(SSH_AVRDUDE) $(AVRDUDE_COM_OPTS) $(AVRDUDE_ARD_OPTS) \
+		$(AVRDUDE_ISP_FUSES_POST)
+endif