Merge branch 'master' into disable-prog-types-compat

4 files changed, 92 insertions, 0 deletions

diff --git a/examples/MZeroBlink/MZeroBlink.ino b/examples/MZeroBlink/MZeroBlink.ino
new file mode 100644
index 0000000..f9a59a9
--- /dev/null
+++ b/examples/MZeroBlink/MZeroBlink.ino
@@ -0,0 +1,19 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+
+  This example code is in the public domain.
+ */
+
+void setup() {
+  // initialize the digital pin as an output.
+  // Pin 13 has an LED connected on most Arduino boards:
+  pinMode(13, OUTPUT);
+}
+
+void loop() {
+  digitalWrite(13, HIGH);   // set the LED on
+  delay(1000);              // wait for a second
+  digitalWrite(13, LOW);    // set the LED off
+  delay(1000);              // wait for a second
+}
diff --git a/examples/MZeroBlink/Makefile b/examples/MZeroBlink/Makefile
new file mode 100644
index 0000000..29cb90b
--- /dev/null
+++ b/examples/MZeroBlink/Makefile
@@ -0,0 +1,24 @@
+# Arduino M0 Pro Programming Port
+BOARD_TAG = mzero_pro_bl_dbg
+
+# Define debug if you want to use gdb
+#DEBUG = 1
+
+# Define port if using Black Magic Probe rather than default localhost:3333
+#GDB_PORT = /dev/ttyACM0
+
+# Define ARM toolchain dir if not using Arduino supplied
+#ARM_TOOLS_DIR = /usr
+
+# Define AVR toolchain dir if not using Arduino supplied and using native port
+#AVR_TOOLS_DIR = /usr
+
+# Define Arduino support package installation path where SAM device support has been installed
+# Linux
+# ARDUINO_PACKAGE_DIR := $(HOME)/.arduino15/packages
+# macOS
+# ARDUINO_PACKAGE_DIR := $(HOME)/Library/Arduino15/packages
+# Windows
+# ARDUINO_PACKAGE_DIR := "C:/Users/$(USER)/AppData/Local/Arduino15/packages"
+
+include ../../Sam.mk
diff --git a/examples/ZeroBlink/Makefile b/examples/ZeroBlink/Makefile
new file mode 100644
index 0000000..60c8435
--- /dev/null
+++ b/examples/ZeroBlink/Makefile
@@ -0,0 +1,30 @@
+# Arduino Zero Native Port (should work with Feather, MKR1000 etc.)
+# BOOTLOADER: The bootloader on these devices loaded when reset is pressed twice
+# or the port is opened/closed at 1200 BAUD. If there is no program on the device,
+# you may have to manually enter bootloader by toggling reset twice.
+# see http://www.avdweb.nl/arduino/samd21/virus.html
+BOARD_TAG = arduino_zero_native
+
+# Define alternative core path if using another board supplier
+#ALTERNATE_CORE_PATH = $(HOME)/Arduino/hardware/sparkfun/samd
+
+# Define monitor port and isp port (bootloader port).
+# Will automatically detect if Linux/macOS but MUST be defined on Windows
+#MONITOR_PORT = com40 # CDC serial
+#ISP_PORT = com39 # bootloader
+
+# Define ARM toolchain dir if not using Arduino supplied
+#ARM_TOOLS_DIR = /usr
+
+# Define AVR toolchain dir if not using Arduino supplied and using native port
+#AVR_TOOLS_DIR = /usr
+
+# Define Arduino support package installation path where SAM device support has been installed
+# Linux
+#ARDUINO_PACKAGE_DIR := $(HOME)/.arduino15/packages
+# macOS
+#ARDUINO_PACKAGE_DIR := $(HOME)/Library/Arduino15/packages
+# Windows
+#ARDUINO_PACKAGE_DIR := "C:/Users/$(USER)/AppData/Local/Arduino15/packages"
+
+include ../../Sam.mk
diff --git a/examples/ZeroBlink/ZeroBlink.ino b/examples/ZeroBlink/ZeroBlink.ino
new file mode 100644
index 0000000..f9a59a9
--- /dev/null
+++ b/examples/ZeroBlink/ZeroBlink.ino
@@ -0,0 +1,19 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+
+  This example code is in the public domain.
+ */
+
+void setup() {
+  // initialize the digital pin as an output.
+  // Pin 13 has an LED connected on most Arduino boards:
+  pinMode(13, OUTPUT);
+}
+
+void loop() {
+  digitalWrite(13, HIGH);   // set the LED on
+  delay(1000);              // wait for a second
+  digitalWrite(13, LOW);    // set the LED off
+  delay(1000);              // wait for a second
+}