aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-24SAMD Cortex M0 device support (Zero, MKR1000, etc)John Whittington
Compilation improvements by adding variant as other obj but not working on device Arduino Zero devices with OpenOCD working Created ARM_TOOLS_DIR and define arm toolchain executables in Sam.mk Check avr-gcc on last AVR_TOOLS_DIR detect and indenting formatting GDB debugging and programming added Documentation updates and define ARDMK_VENDOR rather than include Sam.mk Expand all parse_boards when defined rather than when used Trim extra defines regex working on both macOS and Linux but need better fix Print USB ids and added debug usage to readme Add note on Arduino package dir and made board.txt work Do ARM ARDUINO_ARCH define in Arduino.mk] Add MZeroBlink to non-testable examples for now Remove \B from extra defines grep Add ARDUINO_PACKAGE_DIR for board support files Fix a typo in the README Fix typo in arduino-mk-vars.md Prevent re-including Arduino.mk from Sam.mk when make restarts for upload Add catrina to ARD_REST_OPTS if/else Remove realpath in Sam.mk for cygwin compatability SAMD bootloader support in ard-reset using --zero Enters bootloader using open/close of port at 1200 BAUD, then polls the attached devices for new port enumerating (bootloader). This is how the Arduino IDE operates Bossa support for Zero, MKR1000 etc Re-word Arm README section after Native USB development Reset for zero refactored like IDE Zero bootloader reset tested on macOS and comments added Re-word ARM bootloader and remove imports from testing Patch changes ARDMK_VENDOR->ARCHITECHTURE, show_config_vars, ignore CORE_VER if emtpy Common.mk header guard, openocd/bossac avoid separator, typos Documentation update for patch changes Move ARM tools to Sam.mk and auto-detect include Correct accidental commit of Blink Makefile change Lib fix with alternative core and documentation Append zero to ARD_RESET_OPTS rather than set Prioritise package ARM upload tools over path installed Add note in README on ARM tools versions Move openocd variant config script flag to OPTS
2018-01-03Merge remote-tracking branch 'upstream/master'John Whittington
2017-12-28Merge pull request #541 from sej7278/masterSimon John
Moved ATtiny examples from Blink to ATtinyBlink Probably the last merge of 2017? ;-)
2017-12-28Moved ATtiny examples from Blink to ATtinyBlink and updated the instructions ↵Simon John
(issue #537). Updated the alternate core instructions for e.g. ATmega644p for IDE 1.8
2017-12-22Merge pull request #540 from sej7278/masterSimon John
Moved -e flag for avrdude from set_fuses to ispload
2017-12-22Moved -e flag for avrdude from set_fuses to ispload as you wouldn't want a ↵Simon John
chip erase operation when only setting the fuses. ispload probably should erase the flash+eeprom+lockbits as that's when you upload the sketch. setting fuses should be just that, not deleting anything.
2017-11-07ardmk-init runs without prompt by default, cli arg added to avoid clint ↵John Whittington
dependency
2017-10-13Update Fedora spec fileJohn Whittington
2017-10-12Merge remote-tracking branch 'upstream/master'John Whittington
2017-10-12Run ardmk-init without dependancy if running quietJohn Whittington
2017-10-06Add ardmk-init manpage and correct typosJohn Whittington
2017-10-03Recognize serial monitors with full path in MONITOR_CMDSZEDER Gábor
When assembling the command line for the various supported serial monitors, MONITOR_CMD must match the name of one of the supported commands to be recognized. Serial monitors given with leading path components are not recognized, and a command like make MONITOR_CMD=~/src/picocom/picocom monitor errors out as the fallback monitor command is executed instead of the picocom-specific one. However, sometimes it's necessary to specify a supported serial monitor with its full path, because e.g. the user wants to tests a freshly compiled version before installing it. Sure, the user could just run the serial monitor directly, but that's cumbersome because he has to pay attention to use the right baud rate and USB port. So strip all leading path components, if present, from MONITOR_CMD using the 'nondir' make function before checking whether it's one of the supported serial monitors. This way commands like the above would just work. While at it, remove the single quotes around 'putty': they are both unnecessary and inconsistent with similar constructs throughout Arduino.mk.
2017-10-02ardmk-init linted using pylintJohn Whittington
2017-09-29Merge pull request #529 from szeder/monitor-cmd-with-pathSudar Muthu
Recognize serial monitors with full path in MONITOR_CMD
2017-09-28ardmk-init usage added to README and HISTORY updateJohn Whittington
2017-09-28ardmk-init arg parse options and made V1.0John Whittington
2017-09-28WIP: ardmk-init more verbose about directory operating inJohn Whittington
2017-09-28WIP: CLI project makefile generatorJohn Whittington
2017-09-28Add support for ISP_PROG Atmel IceJohn Whittington
2017-09-28Fix:Add to langmap not set ino,pde using ctagsJohn Whittington
2017-09-27Recognize serial monitors with full path in MONITOR_CMDSZEDER Gábor
When assembling the command line for the various supported serial monitors, MONITOR_CMD must match the name of one of the supported commands to be recognized. Serial monitors given with leading path components are not recognized, and a command like make MONITOR_CMD=~/src/picocom/picocom monitor errors out as the fallback monitor command is executed instead of the picocom-specific one. However, sometimes it's necessary to specify a supported serial monitor with its full path, because e.g. the user wants to tests a freshly compiled version before installing it. Sure, the user could just run the serial monitor directly, but that's cumbersome because he has to pay attention to use the right baud rate and USB port. So strip all leading path components, if present, from MONITOR_CMD using the 'nondir' make function before checking whether it's one of the supported serial monitors. This way commands like the above would just work. While at it, remove the single quotes around 'putty': they are both unnecessary and inconsistent with similar constructs throughout Arduino.mk.
2017-09-10Merge pull request #525 from tuna-f1sh/masterSudar Muthu
Update Windows documentation to allow non-relative paths
2017-09-06Fix indentingJohn Whittington
2017-09-06Auto detect Windows sketchbook path using USERPROFILE not HOME and spellingJohn Whittington
2017-09-05Update HISTORY.mdJohn Whittington
2017-09-05Documentation changes for Windows usageJohn Whittington
2017-09-05Detect Cygwin Python or user installed Windows Python and use according ↵John Whittington
device port
2017-09-04Merge pull request #502 from tuna-f1sh/masterSudar Muthu
Support for generation of project tags file
2017-09-03Merge branch 'master' of https://github.com/sudar/Arduino-MakefileJohn Whittington
2017-09-03Merge pull request #524 from sej7278/masterSimon John
Moved the LTO etc. flags from CXXFLAGS_STD to CXXFLAGS
2017-09-03rm old tags file made safer and only if it existsJohn Whittington
2017-09-03Ido/ino typo in echo when building tagsJohn Whittington
2017-09-02Moved the LTO etc. flags from CXXFLAGS_STD to CXXFLAGSSimon John
2017-09-01Merge with upstreamJohn Whittington
2017-09-01Use LOCAL_SRC variable due to proir assert and only scan libs if there are libsJohn Whittington
2017-08-11Merge pull request #516 from szeder/quote-prefix-tagSimon John
Quote the prefix tag in the space_pad_to function
2017-08-08Quote the prefix tag in the space_pad_to functionSZEDER Gábor
POSIX shells treat an unquoted [abcd] as a pattern bracket expression and apply it for filename expansion. This kicks in and causes troubles in the space_pad_to function when it's called to pad prefix tags like '[AUTODETECT]', because the argument holding such a tag is passed to a shell unquoted. The result is funny output when the directory containing the Makefile also contains any files or directories, whose name is a single upper-case character that can be found in any prefix tags: $ touch A B C D $ make ------------------------- Arduino.mk Configuration: - A C D CURRENT_OS = LINUX - [USER] ARDUINO_DIR = /home/szeder/src/arduino/arduino-1.8.1 - [USER] ARDMK_DIR = /home/szeder/src/arduino/Arduino-Makefile - A C D ARDUINO_VERSION = 181 - A D ARCHITECTURE = avr - A D ARDMK_VENDOR = arduino - A D ARDUINO_SKETCHBOOK = <snip> Prevent this by quoting space_pad_to's parameter when passing it to a shell.
2017-07-25Merge pull request #510 from sej7278/masterSimon John
Add -fno-devirtualize to CXXFLAGS_STD
2017-07-21Add -fno-devirtualize to CXXFLAGS_STD to workaround a g++ bug. As this could ↵Simon John
impact performance we should track when the issue is fixed upstream to remove the flag again (see links from Issue #486) Enabled colourised diagnostics from avr-gcc We forgot to increase ARDMK_VERSION for the 1.6.0 release
2017-07-16Merge pull request #508 from fuzzyTew/robotis-opencm1.6.0Sudar Muthu
Add makefile for Robotis OpenCM
2017-07-12Add makefile for Robotis OpenCM & update version to 1.6.0Karl Semich
2017-06-04Support for generation of project tags fileJohn Whittington
Considering the number of project files spread in different locations when developing an Arduino project, proper use of tags can be difficult; resolving beyond local functions. I've added automatic generation of a tags file, which includes: * Standard ctags source in project dir (.c, .cpp, .h) * Arduino source in project dir (.ide, .pde) * Arduino core based on detected project core from Arduino install. * Included Arduino libraries from user library folder. As a Vim user I find this hugely useful and think it would be a useful addtion for others. Target has been added as `make tags`.
2017-06-02Merge pull request #501 from MilanV/masterSimon John
Document how to setup Makefile for 3rd party boards
2017-06-02Fix paths in the example MakefileMilan Vancura
2017-06-02Document how to setup Makefile for 3rd party boardsMilan Vancura
2017-06-01Merge pull request #500 from sej7278/masterSimon John
Fix autodetection of USB_PID on SparkFun's new ProMicro core Remove use of tilde from documentation
2017-06-01Fix autodetection of USB_PID on SparkFun's new ProMicro coreSimon John
Remove use of tilde in documentation as ~ doesn't work, use $(HOME) instead
2017-04-01Merge pull request #493 from sej7278/masterSimon John
Add support for cu as MONITOR_CMD
2017-04-01Add support for cu as MONITOR_CMD, use ~. to exit, be mindful when using ↵Simon John
over ssh
2017-03-13Update HISTORY.mdSimon John
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-21 00:08:07 +0000