aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-13Bump up version to v1.3.3 for release1.3.3Simon John
Fix #189
2014-04-13Add manpage back to specfileSimon John
Includes following changes - change author info - add examples section Fix #188
2014-04-11Bump up version to v1.3.2 for release1.3.2Sudar
2014-04-11Tweak AVRdude conf file detection in windowsEAGMnor
On windows the AVRdude configuration file is now detected properly. The comments and `README` are updated as well. Fix #187
2014-04-05Merge pull request #185 from sej7278/masterSudar
simplify packaging by removing dependencies on python3/pyserial
2014-04-04simplified packaging by removing dependencies on python3/pyserialSimon John
2014-04-03Merge pull request #183 from sej7278/masterSudar
python3 compatibility
2014-04-02python3 compatibilitySimon John
2014-04-02replace perl reset script with python oneSimon John
Fix #180 Fix #127
2014-03-23Add `BOOTLOADER_PARENT` which has to be set if the user sets either of the ↵Simon John
other two BOOTLOADER variables Fix #178
2014-03-20Add phony target to run pre-build hook scriptJulien Ridoux
Fix #176
2014-03-16Merge pull request #177 from geoffholden/masterSudar
Consider usb... to be a valid ISP_PORT
2014-03-14Fix: Consider usb... to be a valid ISP_PORTGeoff Holden
AVRDUDE requires -P usb to be passed as an argument for some ISP devices, and it is also required in the case where you have multiple usbtiny or usbasp devices connected at once to select a specific one. Fix #167
2014-03-11Fix AVR tools paths for chipKIT in Linux.Christopher Peplin
Fix #175 Fix #174
2014-03-06Beautify arduino-mk-vars.mdtinyladi
Clean up markdown and add code blocks where needed Fix #171
2014-03-06Add `OBJDIR` reference to `arduino-mk-vars.md`tinyladi
Signed-off-by: tinyladi <ladislas@weareleka.com>
2014-03-06Add a reference makefile, with real-world exampletinyladi
2014-02-15Add -D__PROG_TYPES_COMPAT__ to the avr-g++ compiler flagsSimon John
This results in just a deprecated warning rather than an error when using libraries (e.g. jeelib) that still use prog_XXX types This is how the IDE does it, and means that libraries don't have to add the #define __PROG_TYPES_COMPAT__ line Reference: http://www.nongnu.org/avr-libc/user-manual/group__avr__pgmspace.html Fix #169
2014-02-08Add "gpio" to the list of isp's that don't have a portSimon John
The gpio programmer type is used on the raspberry pi to upload using the gpio spi pins via a sysfs interface, with a modified avrdude Fix #165 Fix #166
2014-02-06Merge pull request #164 from sej7278/masterSudar
Include avr-libc/*.c files malloc.c and realloc.c
2014-02-05now includes avr-libc/*.c files malloc.c and realloc.cSimon John
if bug-reporter confirms this fixes issue #163 then should be ok to merge.
2014-02-04Merge pull request #162 from sej7278/masterSudar
Add arduino-mk-vars.md to the RPM SPECfile.
2014-02-04Added the arduino-mk-vars.md file to the Fedora SPECfile.Simon John
Added some notes to the SPECfile regarding overriding the paths to the avr tools - most are in /usr/bin, but gcc/g++ are in an architecture-dependant ccache directory Upped version to 1.3.2 devel
2014-02-04Bump up version to 1.3.1 for release1.3.1Sudar
2014-02-04Add a new target `help_vars`Sudar
This target can display all variables that can be overridden
2014-02-04Document all the variables that can be overridden in child makefileSudar
Huge thanks to @sej7278 for doing this Fix #75
2014-02-02Merge pull request #161 from sej7278/masterSudar
BUNDLED_AVR_TOOLS_DIR is now set correctly
2014-02-01BUNDLED_AVR_TOOLS_DIR is now set correctly using := instead of ?=,Simon John
so that installations using only the arduino-core packages that don't have the $(ARDUINO_DIR)/hardware/tools/avr directory can still use the avr-g++ tools found in the $PATH (/usr/bin) Previously BUNDLED_AVR_TOOLS_DIR was set to an empty string as the directory doesn't exist, which meant that "ifdef BUNDLED_AVR_TOOLS_DIR..." was set rather than skipping to "else SYSTEMPATH_AVR_TOOLS_DIR...." No user would set BUNDLED_AVR_TOOLS_DIR so the assignment operator := should be used not ?= Updated the version info/changes in various locations.
2014-01-29Bump up version to v1.3.0 for release1.3.0Sudar
2014-01-29Fix some typos and errors in changelogSudar
2014-01-29Update `README.md` about compatibility with WindowsSudar
Fix #94
2014-01-29Update changelog about the recent changesSudar
2014-01-28Merge pull request #159 from peplin/simpler-crossplatform-pathsSudar
Override complete compiler tool paths for chipKIT.
2014-01-28Merge pull request #158 from peplin/silent-whichSudar
Silence the stderr output from call to `which`.
2014-01-28Merge pull request #157 from peplin/no-hardcoded-port-in-examplesSudar
Don't hard code MONITOR_PORT in examples, for more flexible testing.
2014-01-29Document that ARDUINO_DIR must be a relative path in WindowsSudar
Fix #156
2014-01-28Merge pull request #155 from peplin/monitor-port-checkSudar
Use more reliable serial device naming in Windows.
2014-01-28Document that ARDUINO_DIR must be a relative path in Windows.Christopher Peplin
2014-01-28Use more reliable serial device naming in Windows.Christopher Peplin
* Strip leading "/dev/" from MONITOR_PORT before handing to avrdude in Windows. * Use the more widely available awk tool instead of bc to subtract 1 from COM ID (as opposed to `bc`). * Allow Windows user to specify "com1" or just "1". * Document MONITOR_PORT format for Windows users.
2014-01-28Don't hard code MONITOR_PORT in examples, for more flexible testing.Christopher Peplin
2014-01-28Silence the stderr output from call to `which`.Christopher Peplin
2014-01-28Override complete compiler tool paths for chipKIT.Christopher Peplin
Previously we were setting the AVR tools path to the PIC32 tools path because it made grabbing the compiling tools easier. Consequently, it made finding the avrdude path much harder, especially since the avrdude files are in different locations in the Linux distributions of MPIDE and Arduino. Instead, we set the AVR tools path to the *correct* path (where *AVR* dude lives), and totally override the CC, CXX, etc. paths to point to their PIC32 equivalents.
2014-01-14Freezing up code for v1.2.0 release1.2.0Sudar
2014-01-14Remove `arduino-mk` folder from all examplesSudar
Fix #154
2014-01-14Simplify package vs git checkout detectionSimon John
Fix #147 Fix #151 Fix #153 The following are the detailed changes - Remove ARDMK_PATH, ARDMK_FILE and arduino-mk subdirectory - Looks for ard-reset-arduino in $PATH or ARDMK_DIR/bin - Fix git-archive command in RPM SPEC file - Remove some whitespace - Remove arduino-mk dir from debian package's arduino-mk.install - Update docs to reflect the above changes - Bump Up version to 1.2.0
2014-01-14Move files out of `arduino-mk` subdirectorySimon John
fix #152
2014-01-14Add information about `package` folder to changelogSudar
2014-01-04Merge pull request #146 from sej7278/masterSudar
Debian package rebuild instructions.
2014-01-05Added some more build dependencies to ensure everything needed to build isSimon John
installed.
2014-01-05Debian package rebuild instructions.Simon John
Shows a user how to make their own Debian packages from Git. Also has instructions for getting official upstream builds for their distro.
generated by cgit v1.2.3 (git 2.25.1) at 2026-01-16 01:53:22 +0000