Added example to show how to program using Arduino as ISP. Fixes #55

2 files changed, 33 insertions, 0 deletions

diff --git a/examples/ATtinyBlink/ATtinyBlink.ino b/examples/ATtinyBlink/ATtinyBlink.ino
new file mode 100644
index 0000000..1d1566d
--- /dev/null
+++ b/examples/ATtinyBlink/ATtinyBlink.ino
@@ -0,0 +1,23 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+  This example code is in the public domain.
+ */
+ 
+// Connect a LED to Pin 3. It might be different in different ATtiny micro controllers
+int led = 3;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);     
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(1000);               // wait for a second
+  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+  delay(1000);               // wait for a second
+}
diff --git a/examples/ATtinyBlink/Makefile b/examples/ATtinyBlink/Makefile
new file mode 100644
index 0000000..a851ad8
--- /dev/null
+++ b/examples/ATtinyBlink/Makefile
@@ -0,0 +1,10 @@
+# Arduino Make file. Refer to https://github.com/sudar/Arduino-Makefile
+
+BOARD_TAG    = attiny85-8
+ARDUINO_VAR_PATH = /home/sudar/Dropbox/code/arduino-sketches/hardware/attiny/variants
+BOARDS_TXT = /home/sudar/Dropbox/code/arduino-sketches/hardware/attiny/boards.txt
+ISP_PORT = /dev/ttyACM*
+
+include $(ARDMK_DIR)/arduino-mk/Arduino.mk
+
+# !!! Important. You have to use make ispload to upload when using ISP programmer