From 675927053720fb8e96c96006ee9a4db095e0adc2 Mon Sep 17 00:00:00 2001 From: Sudar Date: Sun, 9 Jun 2013 17:20:05 +0530 Subject: Added example to show how to program using Arduino as ISP. Fixes #55 --- examples/ATtinyBlink/ATtinyBlink.ino | 23 +++++++++++++++++++++++ examples/ATtinyBlink/Makefile | 10 ++++++++++ 2 files changed, 33 insertions(+) create mode 100644 examples/ATtinyBlink/ATtinyBlink.ino create mode 100644 examples/ATtinyBlink/Makefile (limited to 'examples') diff --git a/examples/ATtinyBlink/ATtinyBlink.ino b/examples/ATtinyBlink/ATtinyBlink.ino new file mode 100644 index 0000000..1d1566d --- /dev/null +++ b/examples/ATtinyBlink/ATtinyBlink.ino @@ -0,0 +1,23 @@ +/* + Blink + Turns on an LED on for one second, then off for one second, repeatedly. + + This example code is in the public domain. + */ + +// Connect a LED to Pin 3. It might be different in different ATtiny micro controllers +int led = 3; + +// the setup routine runs once when you press reset: +void setup() { + // initialize the digital pin as an output. + pinMode(led, OUTPUT); +} + +// the loop routine runs over and over again forever: +void loop() { + digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) + delay(1000); // wait for a second + digitalWrite(led, LOW); // turn the LED off by making the voltage LOW + delay(1000); // wait for a second +} diff --git a/examples/ATtinyBlink/Makefile b/examples/ATtinyBlink/Makefile new file mode 100644 index 0000000..a851ad8 --- /dev/null +++ b/examples/ATtinyBlink/Makefile @@ -0,0 +1,10 @@ +# Arduino Make file. Refer to https://github.com/sudar/Arduino-Makefile + +BOARD_TAG = attiny85-8 +ARDUINO_VAR_PATH = /home/sudar/Dropbox/code/arduino-sketches/hardware/attiny/variants +BOARDS_TXT = /home/sudar/Dropbox/code/arduino-sketches/hardware/attiny/boards.txt +ISP_PORT = /dev/ttyACM* + +include $(ARDMK_DIR)/arduino-mk/Arduino.mk + +# !!! Important. You have to use make ispload to upload when using ISP programmer -- cgit v1.2.3