From 086c6e96ca4b98e8a144b5f7f37a7b3b6fedc61d Mon Sep 17 00:00:00 2001
From: Christopher Peplin <chris.peplin@rhubarbtech.com>
Date: Sat, 20 Sep 2014 16:14:32 -0400
Subject: Move tests back to 'examples', skip non-testable examples when
 testing.

This fixes https://github.com/sudar/Arduino-Makefile/issues/259.
---
 examples/BlinkWithoutDelay/BlinkWithoutDelay.ino | 65 ++++++++++++++++++++++++
 examples/BlinkWithoutDelay/Makefile              |  5 ++
 2 files changed, 70 insertions(+)
 create mode 100644 examples/BlinkWithoutDelay/BlinkWithoutDelay.ino
 create mode 100644 examples/BlinkWithoutDelay/Makefile

(limited to 'examples/BlinkWithoutDelay')

diff --git a/examples/BlinkWithoutDelay/BlinkWithoutDelay.ino b/examples/BlinkWithoutDelay/BlinkWithoutDelay.ino
new file mode 100644
index 0000000..0143571
--- /dev/null
+++ b/examples/BlinkWithoutDelay/BlinkWithoutDelay.ino
@@ -0,0 +1,65 @@
+/* Blink without Delay
+ 
+ Turns on and off a light emitting diode(LED) connected to a digital  
+ pin, without using the delay() function.  This means that other code
+ can run at the same time without being interrupted by the LED code.
+ 
+ The circuit:
+ * LED attached from pin 13 to ground.
+ * Note: on most Arduinos, there is already an LED on the board
+ that's attached to pin 13, so no hardware is needed for this example.
+ 
+ 
+ created 2005
+ by David A. Mellis
+ modified 8 Feb 2010
+ by Paul Stoffregen
+ 
+ This example code is in the public domain.
+
+ 
+ http://www.arduino.cc/en/Tutorial/BlinkWithoutDelay
+ */
+
+// constants won't change. Used here to 
+// set pin numbers:
+const int ledPin =  13;      // the number of the LED pin
+
+// Variables will change:
+int ledState = LOW;             // ledState used to set the LED
+long previousMillis = 0;        // will store last time LED was updated
+
+// the follow variables is a long because the time, measured in miliseconds,
+// will quickly become a bigger number than can be stored in an int.
+long interval = 1000;           // interval at which to blink (milliseconds)
+
+void setup() {
+  // set the digital pin as output:
+  pinMode(ledPin, OUTPUT);      
+}
+
+void loop()
+{
+  // here is where you'd put code that needs to be running all the time.
+
+  // check to see if it's time to blink the LED; that is, if the 
+  // difference between the current time and last time you blinked 
+  // the LED is bigger than the interval at which you want to 
+  // blink the LED.
+  unsigned long currentMillis = millis();
+ 
+  if(currentMillis - previousMillis > interval) {
+    // save the last time you blinked the LED 
+    previousMillis = currentMillis;   
+
+    // if the LED is off turn it on and vice-versa:
+    if (ledState == LOW)
+      ledState = HIGH;
+    else
+      ledState = LOW;
+
+    // set the LED with the ledState of the variable:
+    digitalWrite(ledPin, ledState);
+  }
+}
+
diff --git a/examples/BlinkWithoutDelay/Makefile b/examples/BlinkWithoutDelay/Makefile
new file mode 100644
index 0000000..872d069
--- /dev/null
+++ b/examples/BlinkWithoutDelay/Makefile
@@ -0,0 +1,5 @@
+BOARD_TAG    = uno
+ARDUINO_LIBS =
+
+include ../TestSuiteCommon.mk
+include ../../Arduino.mk
-- 
cgit v1.2.3