From a930c9983f0265247cc867ceba6e2c84f44b2889 Mon Sep 17 00:00:00 2001 From: Gabrielius Mickevicius Date: Mon, 29 Dec 2014 01:05:50 +0200 Subject: Example: set fuses and upload hex on remote programmer Implements two new make rules: 'net_set_fuses' executes a single ssh command, 'net_upload' pipes hex through ssh connection. The example also showcases the FORCE_MONITOR_PORT feature. --- examples/BlinkNetworkRPi/ATtinyBlink.ino | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 examples/BlinkNetworkRPi/ATtinyBlink.ino (limited to 'examples/BlinkNetworkRPi/ATtinyBlink.ino') diff --git a/examples/BlinkNetworkRPi/ATtinyBlink.ino b/examples/BlinkNetworkRPi/ATtinyBlink.ino new file mode 100644 index 0000000..1d1566d --- /dev/null +++ b/examples/BlinkNetworkRPi/ATtinyBlink.ino @@ -0,0 +1,23 @@ +/* + Blink + Turns on an LED on for one second, then off for one second, repeatedly. + + This example code is in the public domain. + */ + +// Connect a LED to Pin 3. It might be different in different ATtiny micro controllers +int led = 3; + +// the setup routine runs once when you press reset: +void setup() { + // initialize the digital pin as an output. + pinMode(led, OUTPUT); +} + +// the loop routine runs over and over again forever: +void loop() { + digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level) + delay(1000); // wait for a second + digitalWrite(led, LOW); // turn the LED off by making the voltage LOW + delay(1000); // wait for a second +} -- cgit v1.2.3